How To Teardown The Samsung Galaxy S6

Country by country, pre-orders of the Samsung Galaxy S6 commence and the phone will be available in early April, but it has already undergone a teardown treatment.

In this guide, i’ll explain how to disassemble Samsung Galaxy S6 to remove back cover, battery, speaker, rear camera, front camera and motherboard, refer on this guide, you can repair your Samsung S6.In this guide, i’ll explain how to disassemble Samsung Galaxy S6 to remove back cover, battery, speaker, rear camera, front camera and motherboard, refer on this guide, you can repair your Samsung S6.

Step 1: Take Out The SIM Card Tray.

▪ Power off the Samsung Galaxy S6.

▪ Use an ejector pin or tweezers to take out the SIM Card Tray.

Step 2: Take Apart The Battery Door.

▪ Heat up the Samsung Galaxy S6's Battery Door.

▪ Pull the battery cover up with a screen suction cup tool. (The battery door is stuck to the middle plate with some really strong adhesive, take your time to remove it)

▪ Separate the battery door with a case opening tool.

Samsung Galaxy S6 using dual glasses design, and the battery can not removable.the back cover is covered with a layer of black cooling stickers.

Step 3: Release The Rear Housing.

▪ Undo the 13 screws in the rear housing.

▪ Heat up the LCD Assembly.

▪ Separate the rear housing from the LCD Assembly with the help of a suction cup tool and case opening tool.

(Notice: be careful not to damage the wireless charging chip attached to the battery.)

Step 4: Remove The Case Buttons.

▪ Remove the power button flex.

▪ Remove the volume button flex.

▪ Remove the Case Buttons. (Notice: the Galaxy S6 power button and volume buttons are compatible with each other.)

Step 5: Release The Wireless Charging Chip

▪ Pry up the wireless charging coil's flex ribbons on both sides of rear housing. (Notice: be careful not to damage the flex ribbons.)

Step 6: Remove The Motherboard.

▪ Pry up the LCD assembly connector, front facing camera connector, battery connector and ear speaker connector.

▪ Turn over the motherboard and pry up the connector.

Step 7: Remove The Battery.

▪ Gently pry up the battery with a spudger tool.

Step 8: Remove Small Components.

▪ Remove the front facing camera.

▪ Remove the ear speaker. (Notice: be careful not to break the flex ribbon.)

▪ Remove the vibrating motor.

▪ Remove the rear facing camera.

Step 9: Release The Charging Port Assembly.

▪ Remove the Bluetooth and Wi-Fi cables.

▪ Undo the earphone jack screw. (Notice: the screw is different than the rear housing screws.)

▪ Heat up the LCD Assembly to release the front housing.

▪ Pry up the navigation light stickers.

Step 10: Release The Home Button With Flex.

▪ Pry up the connector on the back side of home button.

▪ Pry up the home button.

The Samsung Galaxy S6 disassembly is now complete.

For more information:http://www.dbxstore.com/us/Article/how-to-teardown-samsung-galaxy-s6