iPhone 6 Camera Lens Replacement

 Step 1 — Camera Lens 

• Twist off the bottom screws and open the screen with iSclack. You also can see the detailed iPhone 6 front panel assembly replacement as reference.

Step 2 

• Remove the securing bracket for connectors.

 Step 3 

• Disconnect front camera cable connector and home button cable connector.

 Step 4 

• Release digitizer connector and LCD connector. And then remove the front screen.

 Step 5 

• Remove rear camera securing bracket.

Step 6 

• Release rear camera connector and remove the camera carefully.

Step 7 

• It's difficult to remove this bottom bracket. The inside round edge of this bracket seems soldered with camera lens ring. So you need much effort and it's not surprised to break the bracket.

Step 8 

• The last step is to push the cracked camera lens out from inside.
• First, find a tool you prefer and easy to use with effort. Then, put your hands where your power will land to protect the rear case from bending. Next, push the camera lens with effort. Please be careful with the phone and your hand very much.
• When you place the new camera lens, you will need glue or adhesive to fasten the camera lens as well as the new bottom bracket.
• If you worry about iPhone 6 damage, please sent it to Apple center.

iPhone 6 Camera Lens Replacement Parts

http://www.dbxstore.com/us/AllProducts/Index/?q=iPhone+6+Camera+Lens+

How To Fix Vertical Lines On An iPhone Screen After Replacement

Many people reported that their iphone got Zebra lines or blue vertical stripes on a display after iphone screen replacement. Frequently, it’s not the result of a screen that is faulty, then what may cause this problem? Here are some possible causes and solutions.             

1.Bad Connection

Reason, first thing you should do is check the connection between the flex cables and the logic board. If the connectors are obstructed by dust or debris, try to clear them away with a brush and rubbing alcohol. If the connectors are damaged or the flex ribbon is bent over 90°, well, a replacement is needed. After checking those, reconnect the flex cables to the motherboard, making sure the connectors are properly connected.

Solutions, do not force the connectors together until you are sure they are properly lined up; do not bend the flex ribbons during testing and installation.

2. Static Charge

Reason, aside from a bad connection between flex ribbons and the logic board, ESD (Electro-Static Discharge) is another big cause of vertical lines. Too much ESD produced by either the product itself or by human during the test or installation.

Solutions, reduce any static charge by using a body static remover (or touching a ground) before proceeding with any testing or installation. Wear an anti-static bracelet and keep an ion fan on during the repair job.

3. Damaged IC

Reason, possibly the IC on the display is damaged if both of the above methods don’t help. Check the part on the top left and right corners in particular. If there’s any damage, or one of them has been crushed or the IC has been damaged then your part is defective. You’ll have to replace the screen with a new one.

Solution, the screen has to be replaced if the IC was broken. Do not squeeze the IC to avoid damaging it.

Lastly, be sure to use an extension flex to test the screen before reassembly to prevent unnecessarily folding of the flex ribbons, as well as to prevent damage to the fragile connectors.

Unveil The Secrets of iPhone Displays

The cell phone parts marketplace is generally existed within by the unevenness of quality. Several non-original screens are actually sold as original in the market. It would appear that the standard standard differs to country from country. Before buying from your own provider requesting particular concerns is 1 / 2 of the fight to obtain cost effective items, while not every supplier in this industry will give a truthful response to you. 

Consequently, always try to master the principle by yoursely.

How to tell original LCD from copy? How to distinguish different grades of quality? DBXStore helps you unveil the secrets of iPhone displays.

Original Differs from Copy in These Ways:

1.Tighter and easier PCB connector installation 2& 3.Clearer texture of QR code and flex cable.

4.Edges of backlight unit is sealed 

5.Waterproof glass.

6.Code on backlight unit is usually painted while copy's are all the same.

7.More accurate screw holes.

8.No glue residue between glass and frame.

9.Apple logo on QR code and flex cable

10.Precisely soldered backlight unit flex cable.

11.Colored ring printed around front camera hole.

Related news: http://www.dbxstore.com/us/Article/how-to-tell-oem-iphone-6-lcd-and-original-iphone-6-lcd.

Sony Xperia Z4 Teardown

Sony released Xperia Z4 nearly silently in Japan on April 20 this year. Most of the users are highly praise magnetic charging port and uncovered USB port. But how about the inner of Sony Xperia Z4? Let’s have a look by this teardown of Sony Xperia Z4!

First of all, open the Z4 cover flap and remove the SIM & SD card tray. Never forget or it will be a barrier to remove the motherboard. 

Here is the sony z4 lcd screen.

Next, it’s the back glass. We really have rich experience to remove Xperia Z4 back cover because we have dealt with the teardown of Z1, Z2, Z3 and so on. Give the back cover a heat, open a gap, insert into the guitar pick to cut the sticker underneath, and remove the back panel successfully.

Now we can see the components clearly. Yes, Sony Xperia Z4 is a little different from Z3.

It’s easy to remove battery. It features 3.8V and 2390mAh. And here, we released all the connectors from motherboard.

After twisting off several screws with Phillips screwdriver, we can take away the motherboard easily.

And then, we can remove all the components on the top part such as rear camera, front camera, headphone jack, earpiece speaker and several pcs of securing covers and brackets.

As we know, Sony Xperia Z4 is a kind of waterproof cell. And besides the cover flap, what other protections are used to help anti-water. Sony Xperia Z4 3.5mm headphone jack is customized by ALPS. And around the headphone jack, there is waterproof foam.

The earpiece speaker is stuck on the top of the frame with waterproof sticker.

Sony Xperia Z4 rear camera features 20.7M pixels while front camera features 5M pixels.

And now, we move into the left components of Sony Xperia Z4 including charging flex, main flex, sensors assembly, vibrator motor and loudspeaker.

Let’s see some details. There is no USB cover on Xperia Z4 anymore, but for waterproof, Sony applies waterproof rubber gasket around the USB port.

What’s more, there is a cover on the MIC.

That’s Sony Xperia Z4 motherboard.

We stop Sony Xperia Z4 disassmble here, have you know clearly about that phone?

If you need to repair, you can get all Sony Xperia Z4 replacement parts here.

Samsung Galaxy S6 Camera Lens Replacement

One part of the Galaxy S6 that makes us feel a bit miffed that Samsung cut down the battery so much is the camera lens. It sticks out from the back of the super-skinny phone a bit, making it a bit more susceptible to damage than a flush one like the Galaxy S5's.

Have you mentioned that Samsung Galaxy S6 camera lens is a problem and will be a hot problem? Many users complained that S6 camera glass was shattered and camera ring was scratched, are you one of the members who needs repair?

Here is the repair guide for Samsung Galaxy S6 camera lens.( Ps: Samsung galaxy s6 parts are listed here)

Repair Tools: 

◆ Heat gun or hair dryer

◆ Suction cup

◆ Guitar picks 

◆ Tweezers.

Step 1. Remove back cover

It’s the first time for Samsung to apply glass back cover. It still is a little weak, so please be careful when remove S6 back cover.

Step 2. Remove camera lens

Samsung Galaxy S6 camera ring is stuck on the back frame. Use harp tweezers to pry it up from bottom right corner. As for how to separate the camera glass from ring, just push by finger or with spudger. It can be removed quickly.

Step 3. Assemble the camera lens

We get Samsung Galaxy S6 camera lens replacement part which has camera glass and ring separately. So we need to assemble them at first. It’s easy. Peel off the upper film, place the glass on the ring. And then peel off the bottom film, stick the camera lens assembly back to the rear body.

Step 4. Put back the back cover

Install the new sticker on the back cover and put it back to the rear body. The whole S6 camera lens replacement is done completely.

How to distinguish iPhone 6 screen between original and fake?

Many iPhone 6 users love to buy the replacement parts from online websites such as ebay, Amazon even our dbxstore and DIY repair the broken cells. But sometimes, they don’t know whether the screen they get is original or not though it’s marked as OEM on the website. So, today here, we will tell the truth and our experience about how to distinguish iPhone 6 front screen assembly between original and fake.

At first, we have to know what’s the meaning of original iPhone 6 screen and fake iPhone 6 screen. The original screen is the one with original materials, made by original technology and from official assigned factory. While the fake screen here is the one with parts of original materials such as LCD with flex only, the touch panel glass and frame are custom. And it’s assembled by the other tech factories. If you are unlucky to get the one with fake screen, fake glass, fake frame and fake flex, I only can say you are really unlucky. 

So let’s share our experience with you to distinguish between them. 

The first feature, weight. Fake iPhone 6 screen needs other assembly with special glue and it can be pressed so perfectly just like the original one, so it’s a little heavier than the original one. But this feature can’t be the complete right, it’s just a reference. 

The second feature is the frame. The original iPhone 6 screen come with the frame which with fine workmanship, nice color and a piece of small cover. While the frame of iPhone 6 fake screen is rough, yellowish and with no small cover because they don’t have the skilled to do that. So that’s the key point – the small cover.

  

But there also are some people would like to choose fake iPhone 6 screen but not original one. The price is the main reason. Fake screen can work normally and it comes with cheap price even only half of the price of original.

If you have any other ways to help to distinguish iPhone 6 screen between original and fake, please leave your comments and share with us.

Related news: http://www.dbxstore.com/us/Article/how-to-tell-oem-iphone-6-lcd-and-original-iphone-6-lcd.

Dbxstore Focuses on the Cell Phone Parts Business for Repair Store

It's well-known that Guangzhou(China) is becoming among the world’s top digital markets. Along the wealth, there exists quantity of trading businesses of numerous dimensions with. Significantly, all of the businesses took benefit of the ecommerce to enter the worldwide digital areas in a. Their company range contains cell phone parts wholesale, tablet accessory and other electronic products retail etc.

One of the partners of online retailers that are aggressive, there comes a participant called dbxstore.com,who mainly operates business of iPhone part wholesale, including newly iPhone 6 parts wholesale, iPhone 5 parts wholesale and much more. To help enhance the competitive benefits and capabilities, the store is working difficult to ring out the aged business design and also the business design in. those things of feeding and perfecting the shop primarily contain two elements: loving the number of items and cutting client teams.

Retail shopper, repair store and local reseller was previously the client teams that were specific. Nevertheless, after starting the store to get a very long time, the truth that various client teams have varied needs for quality significantly dilutes the power and finally the very best support was obtained by none of the client teams. Create company reputation and to enhance the support, by cutting additional two client groups.About these products DBXStore centers around repair store whilst the distinctive specific client team, the store started as a professional supplier of iPhone part wholesale, iPad parts wholesale and iPod parts wholesale.  Using the regular item improving within the digital item globe, products' prior choice Can't fulfill the rapidly reacting needs of the repair store. Regular, the store changes its selection of products by starting services, including all kinds of cables, chargers of all shapes and screen protectors with diverse materials.

Although change is the unchanged ought to be absolutely the viewpoint the items must talk for itself and also every client is enjoyable with excellent customer support and quality items.