iPhone 6 Camera Lens Replacement

 Step 1 — Camera Lens 

• Twist off the bottom screws and open the screen with iSclack. You also can see the detailed iPhone 6 front panel assembly replacement as reference.

Step 2 

• Remove the securing bracket for connectors.

 Step 3 

• Disconnect front camera cable connector and home button cable connector.

 Step 4 

• Release digitizer connector and LCD connector. And then remove the front screen.

 Step 5 

• Remove rear camera securing bracket.

Step 6 

• Release rear camera connector and remove the camera carefully.

Step 7 

• It's difficult to remove this bottom bracket. The inside round edge of this bracket seems soldered with camera lens ring. So you need much effort and it's not surprised to break the bracket.

Step 8 

• The last step is to push the cracked camera lens out from inside.
• First, find a tool you prefer and easy to use with effort. Then, put your hands where your power will land to protect the rear case from bending. Next, push the camera lens with effort. Please be careful with the phone and your hand very much.
• When you place the new camera lens, you will need glue or adhesive to fasten the camera lens as well as the new bottom bracket.
• If you worry about iPhone 6 damage, please sent it to Apple center.

iPhone 6 Camera Lens Replacement Parts

http://www.dbxstore.com/us/AllProducts/Index/?q=iPhone+6+Camera+Lens+

How To Fix Vertical Lines On An iPhone Screen After Replacement

Many people reported that their iphone got Zebra lines or blue vertical stripes on a display after iphone screen replacement. Frequently, it’s not the result of a screen that is faulty, then what may cause this problem? Here are some possible causes and solutions.             

1.Bad Connection

Reason, first thing you should do is check the connection between the flex cables and the logic board. If the connectors are obstructed by dust or debris, try to clear them away with a brush and rubbing alcohol. If the connectors are damaged or the flex ribbon is bent over 90°, well, a replacement is needed. After checking those, reconnect the flex cables to the motherboard, making sure the connectors are properly connected.

Solutions, do not force the connectors together until you are sure they are properly lined up; do not bend the flex ribbons during testing and installation.

2. Static Charge

Reason, aside from a bad connection between flex ribbons and the logic board, ESD (Electro-Static Discharge) is another big cause of vertical lines. Too much ESD produced by either the product itself or by human during the test or installation.

Solutions, reduce any static charge by using a body static remover (or touching a ground) before proceeding with any testing or installation. Wear an anti-static bracelet and keep an ion fan on during the repair job.

3. Damaged IC

Reason, possibly the IC on the display is damaged if both of the above methods don’t help. Check the part on the top left and right corners in particular. If there’s any damage, or one of them has been crushed or the IC has been damaged then your part is defective. You’ll have to replace the screen with a new one.

Solution, the screen has to be replaced if the IC was broken. Do not squeeze the IC to avoid damaging it.

Lastly, be sure to use an extension flex to test the screen before reassembly to prevent unnecessarily folding of the flex ribbons, as well as to prevent damage to the fragile connectors.

Unveil The Secrets of iPhone Displays

The cell phone parts marketplace is generally existed within by the unevenness of quality. Several non-original screens are actually sold as original in the market. It would appear that the standard standard differs to country from country. Before buying from your own provider requesting particular concerns is 1 / 2 of the fight to obtain cost effective items, while not every supplier in this industry will give a truthful response to you. 

Consequently, always try to master the principle by yoursely.

How to tell original LCD from copy? How to distinguish different grades of quality? DBXStore helps you unveil the secrets of iPhone displays.

Original Differs from Copy in These Ways:

1.Tighter and easier PCB connector installation 2& 3.Clearer texture of QR code and flex cable.

4.Edges of backlight unit is sealed 

5.Waterproof glass.

6.Code on backlight unit is usually painted while copy's are all the same.

7.More accurate screw holes.

8.No glue residue between glass and frame.

9.Apple logo on QR code and flex cable

10.Precisely soldered backlight unit flex cable.

11.Colored ring printed around front camera hole.

Related news: http://www.dbxstore.com/us/Article/how-to-tell-oem-iphone-6-lcd-and-original-iphone-6-lcd.

Sony Xperia Z4 Teardown

Sony released Xperia Z4 nearly silently in Japan on April 20 this year. Most of the users are highly praise magnetic charging port and uncovered USB port. But how about the inner of Sony Xperia Z4? Let’s have a look by this teardown of Sony Xperia Z4!

First of all, open the Z4 cover flap and remove the SIM & SD card tray. Never forget or it will be a barrier to remove the motherboard. 

Here is the sony z4 lcd screen.

Next, it’s the back glass. We really have rich experience to remove Xperia Z4 back cover because we have dealt with the teardown of Z1, Z2, Z3 and so on. Give the back cover a heat, open a gap, insert into the guitar pick to cut the sticker underneath, and remove the back panel successfully.

Now we can see the components clearly. Yes, Sony Xperia Z4 is a little different from Z3.

It’s easy to remove battery. It features 3.8V and 2390mAh. And here, we released all the connectors from motherboard.

After twisting off several screws with Phillips screwdriver, we can take away the motherboard easily.

And then, we can remove all the components on the top part such as rear camera, front camera, headphone jack, earpiece speaker and several pcs of securing covers and brackets.

As we know, Sony Xperia Z4 is a kind of waterproof cell. And besides the cover flap, what other protections are used to help anti-water. Sony Xperia Z4 3.5mm headphone jack is customized by ALPS. And around the headphone jack, there is waterproof foam.

The earpiece speaker is stuck on the top of the frame with waterproof sticker.

Sony Xperia Z4 rear camera features 20.7M pixels while front camera features 5M pixels.

And now, we move into the left components of Sony Xperia Z4 including charging flex, main flex, sensors assembly, vibrator motor and loudspeaker.

Let’s see some details. There is no USB cover on Xperia Z4 anymore, but for waterproof, Sony applies waterproof rubber gasket around the USB port.

What’s more, there is a cover on the MIC.

That’s Sony Xperia Z4 motherboard.

We stop Sony Xperia Z4 disassmble here, have you know clearly about that phone?

If you need to repair, you can get all Sony Xperia Z4 replacement parts here.